sys-ctrl.h File Reference

Header file for the cc2538 System Control driver. More...

Go to the source code of this file.

Macros
SysCtrl Constants, used by the SYS_DIV and IO_DIV bits of the
SYS_CTRL_CLOCK_CTRL register
#define	SYS_CTRL_32MHZ   32000000
#define	SYS_CTRL_16MHZ   16000000
#define	SYS_CTRL_8MHZ   8000000
#define	SYS_CTRL_4MHZ   4000000
#define	SYS_CTRL_2MHZ   2000000
#define	SYS_CTRL_1MHZ   1000000
#define	SYS_CTRL_500KHZ   500000
#define	SYS_CTRL_250KHZ   250000
Definitions of Sys Ctrl registers
#define	SYS_CTRL_CLOCK_CTRL   0x400D2000
	Clock control register.
#define	SYS_CTRL_CLOCK_STA   0x400D2004
	Clock status register.
#define	SYS_CTRL_RCGCGPT   0x400D2008
	GPT[3:0] clocks - active mode.
#define	SYS_CTRL_SCGCGPT   0x400D200C
	GPT[3:0] clocks - sleep mode.
#define	SYS_CTRL_DCGCGPT   0x400D2010
	GPT[3:0] clocks - PM0.
#define	SYS_CTRL_SRGPT   0x400D2014
	GPT[3:0] reset control.
#define	SYS_CTRL_RCGCSSI   0x400D2018
	SSI[1:0] clocks - active mode.
#define	SYS_CTRL_SCGCSSI   0x400D201C
	SSI[1:0] clocks - sleep mode.
#define	SYS_CTRL_DCGCSSI   0x400D2020
	SSI[1:0] clocks - PM0 mode.
#define	SYS_CTRL_SRSSI   0x400D2024
	SSI[1:0] reset control.
#define	SYS_CTRL_RCGCUART   0x400D2028
	UART[1:0] clocks - active mode.
#define	SYS_CTRL_SCGCUART   0x400D202C
	UART[1:0] clocks - sleep mode.
#define	SYS_CTRL_DCGCUART   0x400D2030
	UART[1:0] clocks - PM0.
#define	SYS_CTRL_SRUART   0x400D2034
	UART[1:0] reset control.
#define	SYS_CTRL_RCGCI2C   0x400D2038
	I2C clocks - active mode.
#define	SYS_CTRL_SCGCI2C   0x400D203C
	I2C clocks - sleep mode.
#define	SYS_CTRL_DCGCI2C   0x400D2040
	I2C clocks - PM0.
#define	SYS_CTRL_SRI2C   0x400D2044
	I2C clocks - reset control.
#define	SYS_CTRL_RCGCSEC   0x400D2048
	Sec Mod clocks - active mode.
#define	SYS_CTRL_SCGCSEC   0x400D204C
	Sec Mod clocks - sleep mode.
#define	SYS_CTRL_DCGCSEC   0x400D2050
	Sec Mod clocks - PM0.
#define	SYS_CTRL_SRSEC   0x400D2054
	Sec Mod reset control.
#define	SYS_CTRL_PMCTL   0x400D2058
	Power Mode Control.
#define	SYS_CTRL_SRCRC   0x400D205C
	CRC on state retention.
#define	SYS_CTRL_PWRDBG   0x400D2074
	Power debug register.
#define	SYS_CTRL_CLD   0x400D2080
	clock loss detection feature
#define	SYS_CTRL_IWE   0x400D2094
	interrupt wake-up. More...
#define	SYS_CTRL_I_MAP   0x400D2098
	Interrupt map select.
#define	SYS_CTRL_RCGCRFC   0x400D20A8
	RF Core clocks - active mode.
#define	SYS_CTRL_SCGCRFC   0x400D20AC
	RF Core clocks - Sleep mode.
#define	SYS_CTRL_DCGCRFC   0x400D20B0
	RF Core clocks - PM0.
#define	SYS_CTRL_EMUOVR   0x400D20B4
	Emulator override.
SYS_CTRL_CLOCK_CTRL register bit masks
#define	SYS_CTRL_CLOCK_CTRL_OSC32K_CALDIS   0x02000000
#define	SYS_CTRL_CLOCK_CTRL_OSC32K   0x01000000
#define	SYS_CTRL_CLOCK_CTRL_AMP_DET   0x00200000
#define	SYS_CTRL_CLOCK_CTRL_OSC_PD   0x00020000
#define	SYS_CTRL_CLOCK_CTRL_OSC   0x00010000
#define	SYS_CTRL_CLOCK_CTRL_IO_DIV   0x00000700
#define	SYS_CTRL_CLOCK_CTRL_SYS_DIV   0x00000007
SYS_CTRL_CLOCK_STA register bit masks
#define	SYS_CTRL_CLOCK_STA_SYNC_32K   0x04000000
#define	SYS_CTRL_CLOCK_STA_OSC32K_CALDIS   0x02000000
#define	SYS_CTRL_CLOCK_STA_OSC32K   0x01000000
#define	SYS_CTRL_CLOCK_STA_RST   0x00C00000
#define	SYS_CTRL_CLOCK_STA_SOURCE_CHANGE   0x00100000
#define	SYS_CTRL_CLOCK_STA_XOSC_STB   0x00080000
#define	SYS_CTRL_CLOCK_STA_HSOSC_STB   0x00040000
#define	SYS_CTRL_CLOCK_STA_OSC_PD   0x00020000
#define	SYS_CTRL_CLOCK_STA_OSC   0x00010000
#define	SYS_CTRL_CLOCK_STA_IO_DIV   0x00000700
#define	SYS_CTRL_CLOCK_STA_RTCLK_FREQ   0x00000018
#define	SYS_CTRL_CLOCK_STA_SYS_DIV   0x00000007
SYS_CTRL_RCGCGPT register bit masks
#define	SYS_CTRL_RCGCGPT_GPT3   0x00000008
	GPT3 clock enable, CPU running.
#define	SYS_CTRL_RCGCGPT_GPT2   0x00000004
	GPT2 clock enable, CPU running.
#define	SYS_CTRL_RCGCGPT_GPT1   0x00000002
	GPT1 clock enable, CPU running.
#define	SYS_CTRL_RCGCGPT_GPT0   0x00000001
	GPT0 clock enable, CPU running.
SYS_CTRL_SCGCGPT register bit masks
#define	SYS_CTRL_SCGCGPT_GPT3   0x00000008
	GPT3 clock enable, CPU IDLE.
#define	SYS_CTRL_SCGCGPT_GPT2   0x00000004
	GPT2 clock enable, CPU IDLE.
#define	SYS_CTRL_SCGCGPT_GPT1   0x00000002
	GPT1 clock enable, CPU IDLE.
#define	SYS_CTRL_SCGCGPT_GPT0   0x00000001
	GPT0 clock enable, CPU IDLE.
SYS_CTRL_DCGCGPT register bit masks
#define	SYS_CTRL_DCGCGPT_GPT3   0x00000008
	GPT3 clock enable, PM0.
#define	SYS_CTRL_DCGCGPT_GPT2   0x00000004
	GPT2 clock enable, PM0.
#define	SYS_CTRL_DCGCGPT_GPT1   0x00000002
	GPT1 clock enable, PM0.
#define	SYS_CTRL_DCGCGPT_GPT0   0x00000001
	GPT0 clock enable, PM0.
SYS_CTRL_SRGPT register bits
#define	SYS_CTRL_SRGPT_GPT3   0x00000008
	GPT3 is reset.
#define	SYS_CTRL_SRGPT_GPT2   0x00000004
	GPT2 is reset.
#define	SYS_CTRL_SRGPT_GPT1   0x00000002
	GPT1 is reset.
#define	SYS_CTRL_SRGPT_GPT0   0x00000001
	GPT0 is reset.
SYS_CTRL_PWRDBG register bits
#define	SYS_CTRL_PWRDBG_FORCE_WARM_RESET   0x00000008
Possible values for the SYS_CTRL_CLOCK_CTRL_SYS_DIV bits
#define	SYS_CTRL_CLOCK_CTRL_SYS_DIV_32MHZ   0x00000000
#define	SYS_CTRL_CLOCK_CTRL_SYS_DIV_16MHZ   0x00000001
#define	SYS_CTRL_CLOCK_CTRL_SYS_DIV_8MHZ   0x00000002
#define	SYS_CTRL_CLOCK_CTRL_SYS_DIV_4MHZ   0x00000003
#define	SYS_CTRL_CLOCK_CTRL_SYS_DIV_2MHZ   0x00000004
#define	SYS_CTRL_CLOCK_CTRL_SYS_DIV_1MHZ   0x00000005
#define	SYS_CTRL_CLOCK_CTRL_SYS_DIV_500KHZ   0x00000006
#define	SYS_CTRL_CLOCK_CTRL_SYS_DIV_250KHZ   0x00000007
Possible values for the SYS_CTRL_CLOCK_CTRL_IO_DIV bits
#define	SYS_CTRL_CLOCK_CTRL_IO_DIV_32MHZ   0x00000000
#define	SYS_CTRL_CLOCK_CTRL_IO_DIV_16MHZ   0x00000100
#define	SYS_CTRL_CLOCK_CTRL_IO_DIV_8MHZ   0x00000200
#define	SYS_CTRL_CLOCK_CTRL_IO_DIV_4MHZ   0x00000300
#define	SYS_CTRL_CLOCK_CTRL_IO_DIV_2MHZ   0x00000400
#define	SYS_CTRL_CLOCK_CTRL_IO_DIV_1MHZ   0x00000500
#define	SYS_CTRL_CLOCK_CTRL_IO_DIV_500KHZ   0x00000600
#define	SYS_CTRL_CLOCK_CTRL_IO_DIV_250KHZ   0x00000700
SYS_CTRL_RCGCUART Register Bit-Masks
#define	SYS_CTRL_RCGCUART_UART1   0x00000002
	UART1 Clock, CPU running.
#define	SYS_CTRL_RCGCUART_UART0   0x00000001
	UART0 Clock, CPU running.
#define	SYS_CTRL_DCGCUART_UART1   0x00000002
	UART1 Clock, PM0.
#define	SYS_CTRL_DCGCUART_UART0   0x00000001
	UART0 Clock, PM0.
SYS_CTRL_SCGCUART Register Bit-Masks
#define	SYS_CTRL_SCGCUART_UART1   0x00000002
	UART1 Clock, CPU IDLE.
#define	SYS_CTRL_SCGCUART_UART0   0x00000001
	UART0 Clock, CPU IDLE.
SYS_CTRL_SRUART register bits
#define	SYS_CTRL_SRUART_UART1   0x00000002
	UART1 module is reset.
#define	SYS_CTRL_SRUART_UART0   0x00000001
	UART0 module is reset.
SYS_CTRL_PMCTL register values
#define	SYS_CTRL_PMCTL_PM3   0x00000003
	PM3.
#define	SYS_CTRL_PMCTL_PM2   0x00000002
	PM2.
#define	SYS_CTRL_PMCTL_PM1   0x00000001
	PM1.
#define	SYS_CTRL_PMCTL_PM0   0x00000000
	PM0.
SysCtrl 32-kHz oscillator selection
Prefer the crystal oscillator for time accuracy, and the RC oscillator for cost and power consumption
#define	SYS_CTRL_OSC32K_USE_XTAL   0

Functions
SysCtrl functions
void	sys_ctrl_init ()
	Initialises the System Control Driver. More...
void	sys_ctrl_reset ()
	Generates a warm reset through the SYS_CTRL_PWRDBG register.

Detailed Description

Header file for the cc2538 System Control driver.

Definition in file sys-ctrl.h.