Here is a list of all documented functions, variables, defines, enums, and typedefs with links to the documentation:

- b -

• BASE : beep.c
• beep() : beep.c , beep.h
• beep_alarm() : beep.h
• beep_beep() : beep.h
• beep_down() : beep.h
• beep_long() : beep.h
• beep_off() : beep.h
• beep_on() : beep.h
• beep_spinup() : beep.h
• BIGENDIAN_CPU : gnu.h , iar.h
• BIT : platform-common.h
• BIT32 : platform-common.h
• BITBAND_REG : MK60D10.h , MK60DZ10.h
• BOARD_DEBUG_UART_BAUD : config-board.h
• BOARD_DEBUG_UART_NUM : config-board.h
• BOARD_DEBUG_UART_RX_PIN_MUX : config-board.h
• BOARD_DEBUG_UART_RX_PIN_NUMBER : config-board.h
• BOARD_DEBUG_UART_RX_PIN_PORT : config-board.h
• BOARD_DEBUG_UART_TX_PIN_MUX : config-board.h
• BOARD_DEBUG_UART_TX_PIN_NUMBER : config-board.h
• BOARD_DEBUG_UART_TX_PIN_PORT : config-board.h
• BOARD_HAS_EEPROM : board.h
• BOARD_HAS_FTDI : board.h
• BOARD_HAS_MEMS : board.h
• BOARD_HAS_PA : board.h
• BOARD_HAS_STM32F : board.h
• BOARD_HAS_TEMP_SENSOR : board.h
• BOARD_RTC_LOAD_CAP_BITS : config-board.h
• board_sensors_power_down() : board-sensors.h
• board_sensors_power_up() : board-sensors.h
• BOARD_SLIP_UART_NAME : config-board.h
• BOARD_SLIP_UART_NUM : config-board.h
• BoardIOType : board.h
• BoardResourcesType : board.h
• boolean : gnu.h , iar.h
• broadcast_close() : broadcast.c
• broadcast_open() : broadcast.c
• broadcast_send() : broadcast.c
• BusFault_IRQn : MK60D10.h , MK60DZ10.h
• BUSY_RX : at86rf230_registermap.h
• BUSY_RX_AACK : at86rf230_registermap.h
• BUSY_RX_AACK_NOCLK : at86rf230_registermap.h
• BUSY_TX : at86rf230_registermap.h
• BUSY_TX_ARET : at86rf230_registermap.h
• BUTTON_DOWN_PORT : board.h
• BUTTON_LEFT_PORT : board.h
• BUTTON_RIGHT_PORT : board.h
• BUTTON_S1 : button-sensor.c
• BUTTON_S1_FLAG_BIT : button-sensor.c
• BUTTON_S1_INT_EN_BIT : button-sensor.c
• BUTTON_S1_INTCFG : button-sensor.c
• BUTTON_S1_ISR : button-sensor.c
• BUTTON_S1_MISS_BIT : button-sensor.c
• BUTTON_S1_SEL : button-sensor.c
• BUTTON_SELECT_PORT : board.h
• button_select_sensor : button-sensor.h , smartrf-sensors.c
• button_sensor : contiki-main.c , button-sensor.c , contiki-seedeye-main.c
• button_sensor_init() : button-sensor.c
• BUTTON_Sn : board.h
• BUTTON_UP_PORT : board.h
• ButtonResourceType : board.h
• BUTTONS_IDZ401V1 : board.h
• BUTTONS_MB851A : board.h
• BUTTONS_MB851B : board.h
• BUTTONS_MB851C : board.h
• BUTTONS_MB851D : board.h
• BUTTONS_MB950A : board.h
• BUTTONS_MB950B : board.h
• BUTTONS_MB951A : board.h
• BUTTONS_MB951B : board.h
• BUTTONS_MB954A : board.h
• BUTTONS_MB954B : board.h
• BUTTONS_MB954C : board.h
• BYTE_0 : platform-common.h
• BYTE_1 : platform-common.h
• BYTE_2 : platform-common.h
• BYTE_3 : platform-common.h